High beam
Push to switch from low to high beam.
Push again to deactivate high beam.
High beam assist
This feature activates the high beam when driving in dark surroundings and the vehicle speed is faster than 45 km/h.
The camera in the windscreen detects the lights of oncoming or preceding vehicles. Each LED on right or left side can be triggered or faded out particularly according to the traffic situation. The system switches from low beam to high beam and vice versa to prevent glaring. Once activated, high beam assist remains active and switches high beam on and off depending on surrounding conditions. The latest setting of the high beam assist will remain after the ignition is switched on again.
Activation
The system can be activated via the vehicle settings menu in the Info Display.
High beam is switched on automatically at a speed above 45 km/h. High beam is switched off at a speed below 35 km/h, but high beam assist remains active.
The green control indicator illuminates continuously when the high beam assist is activated, the blue illuminates when high beam is on.
Pushing left indicator lever once switches on manual high beam without high beam assist.
High beam assist switches automatically to low beam when:
If there are no restrictions detected, the system switches back to high beam.
Deactivation
The system can be deactivated via the vehicle settings menu in the Info Display.